background image

Safety and Precautions 

Environmental Conditions  

 

The LCD monitor can be operated at ambient temperatures between 

+41°F 

and

 +95°F  

(5° C to 35° C) and at a relative humidity between 20% and 85% (without condensation). 

 

When switched off, the monitor can be stored between 

-4°F 

and

 +140°F 

(-20° C - +60° C), up to the 

maximum height of 39,000 ft (12,000 m) above sea level at a relative humidity between 20% and 80% 
(without condensation). 

 

After transporting your LCD monitor please wait until it has assumed the ambient temperature before 

connecting and switching it on. Extremely high variations in 

temperature or humidity

 may result in 

condensation forming on the inside of the LCD monitor which could cause an 

electrical short-circuit.

 

Connecting  

 

Please pay attention:

 Parts of the device are still active, even if the power supply is switched 

off. 

Pull the power supply cable

 out of the socket to interrupt the power to your LCD monitor 

or to release the device from voltage completely.

 

 

Do not open the housing of the power supply. An open housing presents a lethal hazard from electrical 
shock. There are no parts inside to be cleaned or serviced. 

 

Operate your LCD monitor using only grounded sockets with 

AC 100-240V~/ 50-60 Hz. 

If you are not 

sure about the power supply at your location, check with your power company.  

 

For additional safety, we recommend use of 

a power surge protector in order 

to protect your LCD 

monitor from damage resulting from 

voltage surges

 or 

lightning

 

To interrupt the LCD monitor from the power supply disconnect the cable from the socket. 

 

To avoid power consumption when the device is switched off either pull out the power plug when the de-

vice is not used or connect the device to a power surge protector. 

 

The power 

outlet

 must be in the vicinity of your LCD monitor and within reach of the power cables. 

DO 

NOT attempt to stretch the power cables to reach a power outlet

 

If you use an 

extension cable

, ensure that it fulfills the 

VDE requirements

. Please ask your  

electrician. 

 

You should lay the LCD monitor cables in a manner that no one can trip or step on them. 

 

To avoid cable damage 

do not place any objects

 

or furniture on the cable

 

Your device has an On/Off switch. The LCD monitor can be switched on or off by means of it. 

No elec-

tricity

 is consumed if the switch is at 

OFF

 (0). Set the On/Off switch to 

OFF

 or use a power surge pro-

tector to avoid consuming electricity when the equipment has been switched off. 

Standards/Electro-Magnetic Compatibility  

Your monitor fulfils the requirements for electro-magnetic compatibility and electrical safety specified in the 
following standards:  

EN 55022, EN 55024, EN 60950, EN 61000-3-2, EN 61000-3-3 

UL60950 / CAN CSA 22.2 No 60950, FCC 

 

When connecting ensure that Guidelines for Electro-Magnetic Compatibility (

EMC

)

 

are observed. 

 

Provide an interval of at least 3.3 feet from 

high-frequency and magnetic sources of interference

 

(television sets, loudspeakers, mobile telephones, etc.) in order to avoid malfunctions and data loss. 

 

Carefully insert the VGA cable straight into the VGA socket of your computer with slight pressure. Please 

pay attention that the cable and socket match exactly. Due to the asymmetrical shape there is only one 

way to fit the cable into the port. If the alignment fails, don't use excessive force. Excessive force may 
damage some pins and destroy the cable. Please tighten both screws of the plug by hand. 

Ergonomics 

 

This monitor complies with all relevant regulations such as DIN EN ISO 9241-3, DIN EN ISO 9241-7 and 

DIN EN ISO 9241-8. 

 

While working with screens you should 

take breaks periodically

 to avoid tension and fatigue. 

 

In order to reduce eye strain and to assure a convenient working area you should 

avoid glare, reflec-

tions

 and 

strong contrasts 

on the screen.

 

For more detailed information on workplace ergonomics, see 

page 9. 

Содержание MD 30999 PD
























Отзывы: