50 of 92
13. Adding the WLAN loudspeaker to a network
Switch on the loudspeaker and wait until the system has
completely powered up (you will hear a welcome tone).
Switch the loudspeaker to WLAN mode. The
OPT/LINE
IN/WIFI
LED flashes yellow.
Connect your mobile device to your WLAN network.
Start the
LIFEBEAT P
app and tap on
Add Device
.
Now press the
WPS
button on the rear of the loudspeaker.
The
OPT/LINE IN/WIFI
LED flashes quickly yellow.
Tap on
Next
.
Now enter the password for your WLAN network and con-
firm your entry by tapping on
Connect
.
A signal tone will sound after the connection has been suc-
cessfully established and the
OPT/LINE IN/WIFI
LED will
light up yellow.
You can now enter a name for your WLAN loudspeaker in
the app. This enables you to differentiate between loud-
speakers if you are operating multiple loudspeakers.
NOTICE
Your mobile device (smartphone or tablet PC) must be registered on
your router's WLAN network.
43061 DE EN TR ECommerce content RC1.indb 50
43061 DE EN TR ECommerce content RC1.indb 50
19.02.2016 14:05:19
19.02.2016 14:05:19
