42 of 92
4.2. Inserting the battery in the remote control
The remote control works with one 3 V button battery, type CR2025.
WARNING!
There is a risk of explosion if batteries are replaced incor-
rectly. Replace batteries only with the same or equivalent
type.
Slide down the battery compartment cover on the back of the
remote control. Remove any spent batteries by pushing them
down and out of the guide and dispose of them at a collection
point for used batteries.
Insert a fresh CR 2025 battery into the battery compartment with
the positive pole facing up. Ensure the +/− terminals are correct.
Replace the cover.
4.3. Connections
WLAN mode: The device has an integrated WLAN antenna.
Mains adapter: Connect the connector plug on the supplied mains adapter to
the
DC IN
socket and plug the mains plug into an AC 100–240 V ~ 50/60 Hz
socket.
LINE IN: Connect a 3.5 mm stereo jack to the LINE IN socket to play back stereo
sound output from other audio devices via the WLAN loudspeaker.
AUDIO IN: Connect a stereo cinch cable to the AUDIO IN sockets to play back ste-
reo sound output from other audio devices via the WLAN loudspeaker.
USB: You can connect a smart device here to charge its internal battery via the
USB connection.
ETHERNET: Connect a network cable to the ETHERNET socket to connect the
WLAN loudspeaker to your home network via LAN.
OPTICAL IN: Connect a Toslink cable to the OPTICAL IN socket to play back digi-
tal audio signals from other audio devices via the WLAN loudspeaker.
CR 2025
+
43061 DE EN TR ECommerce content RC1.indb 42
43061 DE EN TR ECommerce content RC1.indb 42
19.02.2016 14:05:19
19.02.2016 14:05:19
