50
Menu option
Setting
CI INFOR-
MATION
(CI+)
If you want to watch subscription channels, you must first register
with the channel provider. Once you have registered, you will re-
ceive a Conditional Access Module (CI module) and a special card
from your provider. You will find information about the settings in
the documentation supplied with the module.
Install the CI components on your television in the following way:
Switch the television off and pull out the mains plug.
First insert the CI module in the slot on the side of the LCD TV.
Then insert the card.
Please note: only insert or remove the CI module af-
ter you have disconnected the device from the pow-
er supply.
PLEASE NOTE!
Risk of damage!
The CI module or the television could be
damaged if you attempt to insert the CI
module by force.
The CI module must be inserted cor-
rectly: it cannot be inserted if it is the
wrong way round.
Connect the television to the power supply, switch it on, and
wait for a moment until the card is recognised.
Additional setup steps may be required for some CAM mod-
ules, which you can complete in the
CI INFORMATION
menu.
SIGNAL
INFORMA-
TION
The signal information about the currently set TV station is dis-
played here.
This option is only available in DTV mode.
