18
Digital image and sound: HDMI
• Your DVD player has a HDMI (OUT) connection. HDMI is the
only interface in the consumer entertainment electronics sec-
tor that can transmit digital audio and video data simultane-
ously. It can process all current picture and sound formats,
including HDTV (high-defi nition television), and can do this
at the highest current resolution of
1080P
without any loss of
quality.
• You can connect the DVD player to a television set with HDMI
and DVI inputs (HDMI is downwards compatible with DVI –
“Digital Visual Interface”). You will also need a HDMI cable for
connecting to a HDMI input. If your television set has a DVI
socket, you will also need an adapter (HDMI–DVI). These are
available in specialist stores.
PLEASE NOTE!
Once you have connected the HDMI or DVI appliance
then switch on this appliance only. Wait approximately
30 seconds and then switch on the DVD player.
To establish the progressive scan function for the HDMI con-
nection select the resolution
480P, 576P, 720P (50HZ), 1080P
(50 HZ)
, depending on the resolution supported by your tel-
evision set.
PLEASE NOTE!
The HDMI output has been certifi ed according to the
valid HDMI standard. However, it may happen in certain
cases that the connection is not compatible with the
DVI or HDMI connection on another device, and thus
error-free transmission will not be possible. The fault in
this case has nothing to do with the DVD player itself.
83247 EN LUTZ AT Content RC1.indd 18
83247 EN LUTZ AT Content RC1.indd 18
23.09.2011 12:12:43
23.09.2011 12:12:43
