Medion LIFE E14008, Инструкция и список кодов

Страница: 78 / 186

143 * 210 mm
17. Aug. 2010
Basic settings in the OSD menu 29
Esp
a
ñol
English
Deutsch
Codes
Programme Edit
You will see the currently saved channel here. Each channel can
be customised as follows:
Delete
Select the programme you would like to delete and press the
red button
[
PROG
].
Press the
Yes

key if you are sure that you wish to reset the
transmitter. Press the
No

key if you wish to stop the process.
Rename
Select the transmitter that you wish to rename and press the
green [
INTRO
] key.
Now, you will be able to change the first letter; you will be able
to scroll up and down through the letters with the

direction keys.
Move to the next drive letter with

direction key, etc.
Press the green [
INTRO
] key again at the end to save the name.
Move
Select the programme and press the yellow button [
REPEAT
].
Move the channel with

to the desired position and press
the yellow button [
REPEAT
] again. The other channels will be
rearranged accordingly.
Skip
Select the channel you would like to skip while scrolling
through the channels using the buttons
P+/-
and then press
the blue button [
A-B
].
You can still select this channel by using the number buttons.
Fav
To save a station to a favourites list, highlight it and press the
button
FAV
. Call up the favourites list by using the remote
control buttons. See also p. 23
Signal
Information
The signal information of the set station is displayed here.
This option is only available in the DTV mode.
CI Information
If you would like to watch pay channels, you will have to
register with an appropriate provider first. After registration,
your provider will send you a Conditional Access Module (CAM
module) and a special card. You will find notes on the settings
in the documentation supplied with the module.
Install the CI components on your TV as follows:
Switch off the TV and pull out the mains plug.
First insert the CAM module in the slot at the side of the LCD
TV.
Then insert the card.