Security
19
The device will go into the Standby mode automatically after a few seconds if you do not
want to select any of these three possibilities.
For further settings within the Standby mode also see the chapter on “Special CleanUp
Function”, page 73, point 8.
This display will also appear after the delay period of a few seconds has expired, if you
have activated the DC AutoSuspend Comfort Function.
Security
You have the possibility of protecting your device against external access by means of this
function. Some one-off settings will have to be made before you will be able to use this
function. Proceed as follows to do this:
Storing the password and the information note
1.
Go to
Settings
and then to
Device settings
by means of the main display.
2.
Click on
Security
, in order to start the respective function. The following display
will appear:
3.
Click on
, in order to enter a password.
4.
A keyboard will appear. Enter a password with it.
Note
The password must consist of at least 4 symbols. Use a combination of
letters (A – Z) and numbers (0 - 9). Keep the password in a safe place.
5.
Confirm the password with the
symbol after you have entered it.
6.
Enter the password in the second field to reconfirm it and in order to avoid poten-
tial careless mistakes.
