42
7.
Getting
started
7.1. Before connecting the monitor
It is possible that your existing monitor supports a physical resolution that is not
supported by your new monitor. In this case, the image on your new monitor may
not appear correctly once it has been connected.
To prevent this, select a physical resolution that is supported by both monitors
and, if necessary, set this physical resolution in your operating system before
connecting the new monitor.
A table listing the physical resolutions supported by this monitor can be found in
section “7.7. Setting the display resolution” on page 48.
7.2. Mounting the stand
Attach the monitor stand as shown in the illustration. Carry out this step before con-
necting the monitor.
Place the device on the stand. Take care to ensure that the connector fits in the
device recesses and that the stand clicks into place.
Use the screws supplied to screw the stand to the device.
