Neat Zeat
8
www.medifab.com
Assembling your Neat Zeat
Your flat packed Neat Zeat will be packaged according to your ordered specifications.
Some parts may be preassembled. Please follow the following instructions to
assemble your Neat Zeat.
Backrest Assembly
Unpackage the backrest
Note; Figure 2a shows these brackets being attached to get maximum seat depth,
Figure 2b shows the brackets inverted to meet the minimum seat depth.
Install the lateral supports using the following hardware:
•
4 X 25mm Coach bolts,
•
4 X M6 Washers,
•
4 M6 Black Wing Knobs
1.
2.
Figure 2a
Figure 2b
Package 2 & 3 only Additional
Backrest Assembly Steps
3.