Warning: It is not a safety harness & should be worn in
conjunction with the vehicle safety belt.
1. Place the PVC backing of the harness
against the front of the seat back.
2. Pass the two top horizontal fixing straps
around the seat back.
3.
Pass the tail-ends of the horizontal fixing
strap around the vehicle backrest and bring
them up to connect through the Aluminium
Bar Buckles of the top fixing straps
4.
Position the body harness so that the waist
belt will be in line with the waist.
5.
Tighten the horizontal straps to fit the seat
back as securely as possible and pass the
loose ends through the Tri-Glide slide.
This Harness is designed to offer more postural support and a certain degree of restraint to the
passenger.
This harness incorporates a 5-point harness. This harness fit around an existing single seat
6. With the harness unfastened at the waist
belt sit the passenger on the crotch strap
which is lying on the seat cushion and bring
their arms through the shoulder straps.
7. Now bring the crotch strap up between the
legs and loop it back onto the waist belt
over the buckle.
8. Connect the waist belt buckle to fasten the
harness.
9. Adjust all straps to fit tightly yet comfortably
by pulling the tail-ends of strapping through
the adjuster buckles.
10. To remove the passenger from the harness
- Unfasten the buckle on the waist belt at
the centre-front.
Houdini 28 harness has passed dynamic Impact testing to ISO Draft Standard 10542 Pulse and compiles with the
VSE 87/1 voluntary code of practice.
IMPORTANT: BELTS AND HARNESSES SHOULD BE REPLACED IF THEY SHOW ANY SIGN OF FRAYING
OR CUTS, AND ESPECIALLY IF THEY HAVE BEEN INVOLVED IN AN ACCIDENT.