1. The
top of the mat, with the MediCrystal® Logo on it, is not a
heated area
but this and other non-heated areas of the mat still
have anion layers to generate negative ions.
2. MediCrystal® mats have a multilayer system construction with up to
16 different layers. The
special layers (with anion generating fibers)
are added so that the mats generate negative ions
when they are
turned on and functioning. Controllers do not have the option to
activate negative ion generation from the inner mat layers because the
ions generation starts automatically when the mat is heating up, due
to the piezoelectric and pyroelectric effects caused by the distorted
crystallographic structure of the mat’s anion generating layers and
natural amethyst crystals. Negative ion generation will decrease when
the mat cools down.
The number of ions goes up when you lay on
the non-powered mat as gemstones and negative ion generating
layers start to use your natural body heat to produce anions
.
3. The outlets, bimetal safety switches, connectors, and controllers
of all electrical appliances including all brands of hot stone mats
may emit relatively higher levels up to 4-8 mG. Though it is
generally safe, and falls down to zero several inches away, if you
are EMF oversensitive, it is better to keep the controller away
from your head. Also, it is better to use the amethyst pillow or
at least a regular one to avoid occasional contacts between your
head and the mat connector near the logo on the top of the mat.
Or you can lay on the mat with your feet towards the connector.
I
f you do not feel comfortable on the powered mat, you can
eliminate exposure to any electricity just by preheating your
stone mattress to the maximum heat and unplugging it from
the power outlet before you lie on it.
Hot crystals accumulate
the warmth and will naturally release it without electric power. It is
the best practice for long all-night sessions to avoid dehydration,
overstimulation, and buzz or dry mouth effects. Even after the
mat cools down, it utilizes your body warmth to emit infrared rays
and negative ions naturally and safe.
4.
We use the best in the industry advanced EMF-free heating
systems since 2016.
Though the specification states maximum
2 mG emission from the heating surface, the real tests with
professional EMFs measuring devices show max 0.2 mG emission.
It is even closer to zero because when we test the background
EMFs on the unplugged mat, it is usually the same as on the
heating mat. You can check our videos for EMFs measurements on
MediCrystal youtube channel. Please disregard outdated, false or
non-professional information or videos about EMFs testing posted
on the internet by unfair competitors. Fortunately, nowadays the
testers are affordable for everyone, and the best practice is to check
EMFs of the mat and other home appliances yourself. The best EMFs
meters for home use combine simplicity, sensitivity to electric and
magnetic waves in a broad range, and ability to filter out the noise
distortions or measurement errors. We recommend an easy to use
the “K2 EMFs meter” manufactured in the U.S. and available on
Amazon for $60. This meter covers frequencies from 50 to 20,000
Hz and works fine instantly measuring EMFs of any appliances.
5. Due to the artisan nature of the construction process
there is some
difference between mats regarding the maximum temperature
they may reach in the same conditions and the heating speed
. If
the mat is covered with thick blanket or your body is on the mat, the
max level of the bare mat surface temperature may be in the range of
55-65 °C or 133–158 °F (displayed by the controller measuring the
temperature of the heating elements inside the mat as 65-72 °C),
which is quite normal.
It is very important that you cover the mat
COMPLETELY while preheating it.
If you cover the mat partially
the temperature sensors positioned in the different layers of the
mat around all the surface will report different and controvercial
measurements to the main controller. Finally controller may loose
calibration and start to work incorrectly or malfunction.
6. Mini mat is great for localized use, when you need to apply heating
crystal rays and
focus to some area of your body (back or legs
most frequently) without causing the whole body to undergo
hyperthermia
. You can use it on high heat for local application
without overstimulating the whole body. It is portable, more
bendable, and can be used to cover the body when you are on the
large mat for the more intensive “sandwiched” sessions. Of course,
the Mini mat can still be used as a sole unit for high heat detox
sessions with sweating, but it takes more time to influence the body
in this way. But if you use high temperature and your body usually
sweats in the sauna or when you do sports or workout, the Mini will
work fine as well.
7. In general the bigger and more powerful the mat is, more benefits
it brings and the shorter the sessions necessary. Midsize and
larger mats are great for both the whole body experience and re-
energizing sleep. Just be sure that
the heat level is on the safe,
lowest levels of 30-45°C or use the mat either unpowered or in
negative-ions-only mode at night
. Do not use high heat when you
go to bed. Do not rely solely on the timer. Some customers choose
to connect the mat through another timer plugged into the the wall
outlet for double safety in order not to fall asleep on the hot mat and
dehydrate. Take extra care during nighttime use and keep the mat
only on low heat settings.
ADDITIONAL INFO
GREAT ADDITION
PILLOWS
* sold separately from the mat
Hard or Soft Amethyst B-Shape
Contour Pillow is a preferable
choice for high heat sessions,
to relax or sleep.*
Firm Amethyst Mini Pillow
is a great addition to be
used under neck or knees.*
for Queen
®
USER GUIDE
4
Содержание Classic Amethyst Queen Mat
Страница 1: ......
