7
mode section, and press the lower part of the side button to adjust to the "0" section.
The screen displays as shown in Figure 14 and press the main button to save; continue
to press the upper part of the side button to 7 mode section, then press the lower part
of the side button to adjust to the "0" section,the screen displays as shown in Figure
15, press the main button to save, press the "main button" and keep pressing down for
more than 8 seconds and then exit.
Fig.14 Fig.15
●
The mode switching function should be carried out under professional guidance.For
the statistical algorithm of body temperature mode, please consult our after-sales
department.
11 Measuring method
11.1 Before and after use, please keep the inner cavity of the sensor and probe clean.
11.2 Please use the thermometer in a suitable temperature environment. When the
ambient temperature of the thermometer changes greatly (such as from indoor to
outdoor), please put the thermometer in the new environment for about 30 minutes
before measuring.
11.3 When the measurement object comes from a place with a large difference in
temperature from the measurement environment, the measurement object should stay
in the test environment for at least 5 minutes.
11.4 Try not to measure with forehead blowing, water dripping, sweating, applying
cosmetics, etc. Do not measure temperature within 30 minutes after exercising,
bathing, and eating.
11.5 Do not use this product in direct sunlight.
12. Installation and replacement for battery
●
When using for the first time, please open the battery cover, put in two new AAA
(7#) batteries, install them in the battery compartment correctly according to the
polarity of the positive and negative poles, and close the battery cover.
●
When the screen displays as shown in Figure 16, it means that the battery has been
already in a low voltage state, but it can still meet the measurement.It is recommended
to replace the battery as soon as possible; if the screen displays as shown in Figure 17,
the thermometer will automatically shut down, and please replace the battery before
use.
