5
Battery status
3
Display
Battery power is low, please pay attention to
replace the battery
No display
The battery is fully charged
Environmental
temperature
4
Display
Measurement mode of environmental
temperature and display value is environmental
temperature
No display
Measurement mode of body temperature, and
display value is body temperature
10.Setting operation
10.1 Measurement for body temperature
●
Press the "Measurement/Switch" button, the thermometer will start up and carry out
self check, all light segments of the LED display screen will light up briefly, and the
screen display is as shown in Figure 1. After completing the self check, enter the
standby mode, and the screen display is as shown in Figure 2.
Fig.1 Fig.2
●
Align the probe area with the forehead of the person to be measured within a
suitable distance, and press the "Measurement/Switch", the thermometer will vibrate
for a short time, the screen display is shown in Figure 3, and report the measurement
result.
●
If the distance from the probe area to the person's forehead is not appropriate, the
screen display is shown in Figure 4.
Fig.3 Fig.4
10.2 Invalid measurement prompt
● When the measured value is lower than 34.1
ºC, LO is displayed (Figure 5) , and
send the prompt sound of "Body temperature is too low, invalid measurement";
● When the measured value is higher than 42.9
ºC,
HI is displayed
(Figure 6), and
send the prompt sound of "Body temperature is too high, invalid measurement";
