MediaKind RX8000, Руководство по установке

Страница: 9 / 12

MediaKind RX8000 www.mediakind.com 9
4 Setting IP Address
The RX8200 can connect to a control network via either of the two IP control interfaces on the rear
of the IRD (labelled ETHERNET 1 / 2 or CONTROL 1 / 2). In this case please select CONTROL
or ETHERNET 1
Enter the settings for the relevant control port (IP Address, Subnet and Gateway) via the front
panel 1.1 Network Settings menu. Navigate to this page using the

(Forward) and

(Down)
keys from the root menu.
4.1 Control Port 1 IP Address and Subnet
This menu displays the Control Port 1 IP Address and. To navigate to this menu, press the

(Forward) key. Please enter the IP address and subnet as needed for your network configuration.
IP 1 |IP: 000.000.000.000
1.1.1 |SUBNET: 000.000.000.000
After selecting EDIT use the

(Forward) and

(Back) keys to move between IP and Subnet,
then use then use the

(Up),

(Down),

(Forward) and

(Back) keys to enter the address.
4.2 Default Gateway 1
This menu enables the viewing and editing of the gateway address for the control network. To
navigate to this menu from the above menu, press the

(Down) key four times.
GATEWAY |GATEWAY
1.1.5 |000.000.000.000
Use the

(Up),

(Down),

(Forward) and

(Back) keys to enter the address. Please enter the
gateway address as needed for your network configuration.