MediaKind RX8000
www.mediakind.com
4
1
Overview
This document describes how to perform a basic set-up of the RX8200 for Fox Cable.
2
Connecting the RX8200
The above diagram shows the rear panel of the RX8200. The following connections shall be made
on the rear panel of the RX8200:
Insert the supplied CAM into the slot on the front panel. NOTE: the CAM is marked with the serial
number of the RX8200. This must match.
Connect the audio, using the 9-pin D-shell connectors and break-out cables. The audio 9-pin D-
shell connectors provide analog stereo outputs as well as AES3 digital outputs.
Connect the AC power.
Connector
Source
CVBS
Composite Video Output > SD Analogue (75
BNC)
RF IN 1
G15 Vertical
RF IN 2
G17 Vertical
RF IN 3
G15 Horizontal
RF IN 4
G17 Horizontal
ASI/HD-SDI/SD-SDI Out 1
SD-SDI Output 1
ASI/HD-SDI/SD-SDI Out 1SD-
SDI Output 2
FRAME SYNC
Black and Burst Signal
Pin
Use
1
AES3 Digital Audio +
2
Ground
3
Left +
4
Right +
5
Ground
6
AES3 Digital Audio -
7
Ground
8
Left -
9
Right -
