Media5 Mediatrix C710, Руководство по установке оборудования

Страница: 14 / 52

Chapter 1 - Overview Mediatrix C7 Series Connectors and Indicators
2 Mediatrix C7 Series – Digital Gateway
Front Indicators and Connectors
See “Indicators (LEDs)” on page 16 for a description of the LED patterns the Mediatrix C7 Series may have
and the states they represent.
Figure 1 shows the five visual indicators located on the front of the Mediatrix C7 Series.
Figure 1: Mediatrix C7 Series Front Panel Indicators
Table 3 describes the LEDs on the front panel of the Mediatrix C7 Series.
Rear Connectors
The Mediatrix C7 Series has several connections that must be properly set. Figure 2 shows the rear panel of
the Mediatrix C7 Series.
Figure 2: Mediatrix C7 Series Rear Panel Connectors
Table 3: Mediatrix C7 Series Front LEDs
LED Description
1. Ready When lit, the Mediatrix C7 Series is ready to initiate or receive a call. The unit does
not have to be registered to a server.
2. In-Use When lit, at least one of the FXS/FXO lines is in use.
3. ETH2 Provides the state of the network connected to the ETH2 connector.
4. ETH1 Provides the state of the network connected to the ETH1 connector.
5. Power When lit, power is applied to the Mediatrix C7 Series.
Reset /
Default
Power In-Use ETH2 ETH1 Ready
C7
SERIES
1
2
3
4
5
Note:
The FXS and FXO ports may differ location depending on the model you have.
1 2 3 4 1 2 3 4
FXO FXS ETH2 ETH1 USB
Power
Reset /
Default
12V 2.5A
2 5
1
3
6
4
7