DMR160
User’s Guide
V2.0
50
Command Line
The
DMR160
has a Command Line interface that can be accessed from Telnet or RS-232. A list of
commands can be found in the External Control section of this manual.
Telnet (TCP/IP)
The Telnet port by default is not enabled. To turn on Telnet control, set the Telnet port number (typically
Port 23) and check the
TCP/IP port enable
checkbox. A password challenge to the Telnet session can
be enabled by entering a password in the
Password for TCP/IP connection
text box. If a password is
not desired on the Telnet session, leave the text box blank.
RS-232
On the back of the
DMR160
there is a control port configured as a DTE supporting RS-232 protocol. A
Null-Modem
cable should be used between the
DMR160
and the COM port on your PC.
Terminal session settings required for RS-232 control are:
9600
,
8
,
None
,
1
with
No Flow Control
.
There is no password protection on this interface and, by default, the RS-232 port is enabled. The
administrator has the ability to disable the port by un-checking the
COM port enable
checkbox.
Содержание DMR160
Страница 2: ...DMR160 User s Guide V2 0 2 ...