Media Pointe DMR, Руководство пользователя

Страница: 16 / 34

| DMR User Manual 4.0
August 2009
2
Setting Up the DMR
Setup
Use this information when you first purchase the DMR and
when you are ready to install the hardware at your site. This
section shows the back panel and explains how to connect the
separate input connections to the unit.
Use this information when you are ready to install the DMR
hardware at your site. To turn on the unit ensure the power
supply switch is in the ON position then start the unit by
pressing the POWER button.
Logging In
This section describes the procedure for a first time
login, and the DMR access rights.
The default IP address is:
192.168.1.253
Web Portal Access:
To log into the DMR, browse to its IP address using your
Internet browser. There are three levels of access
rights. There is a “user” login, an “author” login, and a
system “admin” login.
As an Administrator
The Administrator maintains all rights to the DMR.
1. If you are already logged into the DMR as a user or
author, click on the LOG out selection at the top right
of the web UI. You will be able to enter a username and
password.
2. Use the login id “admin”. The default password
is “MediaPOINTE”. Note that the login id and the
password are case sensitive.
3. From the User Security selection of the main menu,
the Administrator can enable or disable logins for users
and authors and can change the admin password.
Changing the Administrator Password
Administrator rights are required to access or change
any of the settings under the “Configure” and
“Manage” sections in the main menu. By default, the
Administrator ID and password are set to “admin” and
“MediaPOINTE” respectively. It is not possible to change
the Administrator ID. It will always be “admin”.
To change the Administrator password, enter a new
Administrator password in the “New admin Password”