Play a Song
Song indicator
Beat indicator
tempo
Select a Song
This drum module has a total of 60 preset songs.
Note:
The preset song setting is 001 after you slide on power.
1.
Press [ song / volume ] button.
The song indicator lights and the current song's number appears.
2.
Press [ + ] or [ - ] buttons to select one of the song and listen to it.
Song numbers 001 - 060 are preset songs.
Listen to the Song
1.
Press [ start/stop ] button and the beat indicator is flashing.
The song will start playback from the beginning.
2.
You can stop the song during playback by pressing the [start/stop]
button.
* The ASSIGN pad's indicator flashes at the first beat of each measure.
Note:
The ASSIGN pad's indicator can be lighted off by pressingboth [hi-hat
control] and [kick] buttons at the same time. You can also listen to the
song by hitting the crash pad when the pad pattern funtion is not setting
off.
Adjust the Song's Volume
1.
Press the [ song / volume ] button to select the volume of song.
Display shows : " A XX". (XX = level value, 00 to 31)
2.
Press [ + ] or [ - ] buttons to adjust the volume of song accompaniment.
Adjust the Song's Tempo
1.
Press the [ tempo + ] or [ tempo - ] buttons. Display shows the
current tempo value.
2.
Press the [ tempo + ] or [ tempo - ] buttons to increase or decrease
the tempo. (tempo value in the range of 30 to 280)
* Holding down either a [ tempo +] or [ tempo - ] buttons to change the
setting in a high speed.
* Press [ tempo + ] and [ tempo - ] buttons at the same time to reset the
tempo to default value.
Note:
About 2 seconds after you stop pressing the [Tempo]button, display
changes to show your selected song, voiceor kit number instead of
tempo value.
9
C
M
Y
CM
MY
CY
CMY
K
AW_DD504D_Manual_G01_040709.ai 9 2014/7/9 10:57:53
AW_DD504D_Manual_G01_040709.ai 9 2014/7/9 10:57:53