Setting
Reverb
This function sets the reverb effect of the drum.
1.
In " kit mode", press the [ kit ] button, display shows the current
reverb setting.
2.
Press [ + ] or [ - ] buttons to turn on or turn off the reverb.
Tuning
This function sets the pitch of each drum pad voice.
1.
Press the [ voice / volume ] button to select the pitch setting display
shows : " P XX". (XX = value, 00 to 15)
The pad button indicator lights and display shows the current pitch
setting of lighting pad.
2.
Press the [ PAD ] button or kit the percussion pad you want to
adjust.
3.
Press the [ + ] or [ - ] buttons to set the pitch you want.
4.
Repeat step 2 and 3 to set the pitch of other pad voice.
Factory Reset
This drum module will reset its to initial settings.Beware all the data will
be lost.
1.
Turn the power off.
2.
Turn on the power while holding the [ tempo - ] and [ tempo + ]
buttons.
ERP Function Instruction/ERP
In order to save energy, we have designed the “Automatic shutdown”
function for the drum module. With this function, the drum module will
shutdown automaticallywhen you have left it idle for more than 30
(default) minutes.
If you don't need this feature, just press and hold the [START/STOP]
button then turn the drum module on. You will also see the 3-digit-LED
temporarily displaying“PoF” for 3 seconds before entering the main
menu which indicates that the “Automatic shutdown” function is turned
off.
14
C
M
Y
CM
MY
CY
CMY
K
AW_DD504D_Manual_G01_040709.ai 14 2014/7/9 10:57:53
AW_DD504D_Manual_G01_040709.ai 14 2014/7/9 10:57:53