Setting
Adjust the Pad Sensitivity
You can adjust the sensitivity(gain) of the inputs from pads.
1.
Hold down [ kit ] and press [ voice / volume ] buttons.
Display shows: "EXX", the pad sensitivity value is indicated.
(XX=gain level value, 00 to 15.)
2.
Press [ pad ] button or hit the pad you want to set.
The pad indicator light.
3.
Press [ + ] or [ - ] buttons to adjust the sensitivity of pads.
Range : 00-15
Large values will produce a high sensitivity even if the pad is hit
softly. Lower values will producing a low sensitivity even if the pad is
hit forcefully.
4.
Repeat step 2 and 3 for to set the voice for another pad or bass
drum.
Note:
1.
After adjusting the sensitivity value, you can save them into built-in
memory. In the sensitivity mode, the sevstivity value is displayed,
press [save] button and the senstivity value will be saved, and then
return to previous display.
2.
The drum remains untouched for 10 seconds, the LED will return to
previous display.
3.
If turn off the power without save, you will lose the changes you have
just made.
Set the Rejection for Each Pad
Prevents crosstalk caused by pads or drums connected to other inputs.
Events triggered by other pads that are of a lower inputvalue than what
is set here will not be delivered for a set lenghtof time.
1.
Hold down [ voice / volume ] and press [ song / volume ] buttons.
Display shows: "JXX", the rejection value is indicated.
(XX=rejection level value, 00 to 15.)
2.
Press [ pad ] button or hit the pad you want to set.
The pad indicator light.
3.
Press [ + ] or [ - ] buttons to adjust the sensitivity of pads.
Range : 00(no rejection)-15
4.
Repeat step 2 and 3 for to set the voice for another pad or bass
drum.
Note:
1.
After adjusting the rejection value, you can save them into built-in
memory. In the rejection mode, the rejection value is displayed,
press [save] button and the rejection value will be saved, and then
return to previous display.
2.
The drum remains untouched for 10 seconds, the LED will return to
previous display.
3.
If turn off the power without save, you will lose the changes you have
just made.
13
C
M
Y
CM
MY
CY
CMY
K
AW_DD504D_Manual_G01_040709.ai 13 2014/7/9 10:57:53
AW_DD504D_Manual_G01_040709.ai 13 2014/7/9 10:57:53