Medela lactrina, Инструкция по эксплуатации

Страница: 16 / 20

5. Adjusting Vacuum
The Lactina
®
Select features a knob to adjust the pumping speed
Choose a fast pumping rhythm to start your milk flowing (setting 7
corresponds to highest speed level) Once your milk starts to flow or
you sense milk ejection you may adjust the rhythm by decreasing speed
slightly (eg setting 4)
To adjust vacuum set the vacuum regulator
to minimum and start pumping Adjust
the vacuum to your Maximum Comfort
Vacuum
™
This is the highest vacuum you
can use and still feel comfortable (different
for every mother) To find your Maximum
Comfort Vacuum increase vacuum until
pumping feels slightly uncomfortable (not
painful), then decrease
6. Service Information
Important:
Before starting the procedure described below, do not forget to
switch off the pump and to disconnect the power cord from the
main supply!
The design of your Medela Lactina breastpump means that routine
servicing is not normally uneccessary All bearings are maintenance-free
and, when used as directed (ie only in a dust-free environment and
in the normal operating position), there is almost no dirt entering the
drive unit Cleaning the outside of the pump is the only care needed,
particularly around the pivot arm and the guide slot for the cylinder
holder
13