Medela lactrina, Инструкция по эксплуатации

Страница: 14 / 20

11
To Sanitize at Home:
Disassemble and sanitize by boiling for 10 minutes
After each use:
• Disassemble and wash all parts that come in contact with the breast
and milk in warm soapy water
• Rinse in clear water
• Air-dry on clean towel and cover parts when not in use
All parts may also be washed in top rack of dishwasher
For Quicker Cleaning:
Medela offers Quick Clean
™
Micro-Steam
™
bags for daily kit
disinfection
Tubing Care:
Inspect tubing after each pumping session for condensation
and/or or milk
If condensation appears in tubing:
To eliminate condensation after you have completed pumping, continue
running the pump with the tubing(s) attached for another 1-2 minutes
or until dry, while you attend to storing your pumped breastmilk
If milk appears in tubing:
1 Turn off the pump and unplug from power source
2 Remove and disassemble the tubing and kit parts Wash in soapy
water then rinse in cold clear water
3 Shake water droplets out and hang to air-dry For faster drying,
attach tubings to pump and run pump 1-2 minutes or until dry, or
pour a small amount of isopropyl alcohol through the tubings to dry
4 Make sure that valve membranes are undamaged and clean
Replace if necessary
5 Use a damp cloth to wipe the pump Do not immerse the pump
in water
6 When components are completely dry, reassemble breastpump
and kit