Medela Calesca, Инструкция по эксплуатации

Страница: 12 / 70

12
EN
The LCD display will flash the information that was entered
into the device and display the completion time. Confirm that
the information is correct and press the start button
start
to
begin thawing.
NOTE: If the information is incorrect, press the stop button
stop
and repeat programming steps above.
17
Use the arrows to enter the volume of milk to be thawed.
Press the enter button
enter
to confirm volume.
NOTE: If you hold down the left or right arrow key, it will
decrease or increase in increments of 10 mL.
16
Press On/Off button to turn on the device. The device
defaults to the warm mode . Press the right arrow key
to highlight the thaw mode . Press the enter button
enter
to confirm thaw mode. The device defaults to frozen
when in thaw mode .
15
If the lid is opened during the holding cycle, the visual indica-
tor will flash orange, and the unit will go into a pause mode
for 60 seconds. If the syringe or container is placed back into
the unit, the start button
start
can be pressed, and the holding
cycle will continue to completion.
Once the hold cycle has expired, the unit will no longer main-
tain temperature. It will beep every 15 seconds (if not muted)
until the lid is opened or unit is stopped. Gently mix breast
milk or supplement and press stop upon removal.
NOTE: Open the lid to activate pause mode while using
a syringe.
WARNING: Always feel container/syringe and check milk
temperature prior to feeding.
14
When the warming cycle is complete, the visual indicator on
the unit will flash green and the audible indicator (if not muted)
will chime. When the warming cycle is complete, the device
will automatically go into a holding cycle for up to 30 minutes.
During the holding cycle, warm air that is maintained at body
temperature will continue to circulate in the unit to ensure that
the milk does not cool prior to feeding. The visual indicator will
continue to flash green. The audible indicator (if not muted) will
chime every 5 minutes until hold cycle time expires. Remove
the milk before the hold cycle expires.
13
NOTE: Calesca was designed to warm milk from refrigerator temperatures (approxi-
mately 4 ˚C/39.2 ˚F). If milk contains any ice at the beginning of the cycle, the final
temperature of the milk at the end of the warming cycle may fall below the designed
range of the device.
Thawing mode
IV Operation VII