11
EN
Press On/Off button
to turn on the device. Look at the
LCD display to confirm the device is in WARM
mode.
NOTE: The device defaults to warm mode.
8
Warming mode
Select the milk starting temperature (refrigerated, room, or
frozen) by using the arrow keys
/
to highlight the desired
starting temperature.Press the enter button
enter
to confirm
starting temperature.
NOTE: The device initially defaults to the milk starting tem-
perature (symbol refrigerated) (refrigerated) based on 4 ˚C or
39.2 ˚F.
9
Use the arrows to enter the volume of milk to be warmed.
Press the enter button
enter
to confirm volume.
NOTE: If you hold down the left or right arrow key, it will
decrease or increase in increments of 10 mL.
10
The LCD display will flash the information that was entered
into the device and display the completion time. Confirm that
the information is correct and press the start button
start
to
begin warming.
NOTE: If the information is incorrect, press the stop button
stop
and repeat programming steps above.
11
There are two timers located on the LCD display. The lower
left display will show the total cycle time and will count down
to zero. The upper left display shows the total elapsed time
the breast milk or supplement has been in the device.
If the lid is opened during the warming cycle, the unit will go
into a pause mode for 60 seconds. The visual indicator on
the front of the unit will flash orange. If the syringe or con-
tainer is placed back into the unit, the start button
start
can
be pressed, and the cycle will continue to completion. If the
60 seconds is exceeded, the unit will stop and reset.
NOTE: Open the lid to activate pause mode while using a
syringe.
12
Содержание Calesca
Страница 2: ......
Страница 66: ...66 Notes Notes ...
Страница 67: ...67 Notes ...
Страница 68: ...68 Notes ...