36
EN
37
EN
Unit Setting (kPa or mmHg)
Long press the memory button
for 3~4 seconds until the units
displayed when the unit
powered off.
Memory Values Cleaning out
When reading the measurement
values, press and hold the “MEM”
button, then press START/STOP
button for about 3-4 seconds.
9. EXCEPTIONAL SITUATIONS
Symbol Problem Correction
The course of infla-
ting appears error.
When the batteries
power are too low.
Wrap the cuff properly.
Make sure that the air plug is properly inserted in the unit.
Inflate over again after ensuring.
Error Indicators
The following symbol will appear on the display when measuring abnormal.
Do not move and talk while measuring.
Measure over again according to correct way.
Replace all of the worn batteries with new ones.
Eliminate Fault
Problem
Causes and Solutions
No power.
No display appears on the display screen.
Measurement values appear too high or too low.
Replace all the worn batteries with 4 new ones.
Check the battery installation for proper place-
ment of the batteries polarities.
Blood pressure varies constantly. Many factors
including stress, time of day, how you wrap the
cuff, may affect your blood pressure. Review the
sections “Proper Use of the Arm Cuff” and “Take
a Measurement”.
man DISPLAY 23-44 EN 09.indd 36-37
man DISPLAY 23-44 EN 09.indd 36-37
12-05-2009 10:16:20
12-05-2009 10:16:20