MEDAP 5752 4916 Скачать руководство пользователя страница 23

Страница: 23 / 32

Cleaning and disinfection

Disinfection

GA 5752 4981 GB 15

WARNING!

Property damage!
Disinfectants that contain volatile aromatic hydrocarbons, ammonia, amine, ester,

halogenated hydrocarbons and / or ketone may attack plastics made of

polycarbonate.
Do not use disinfectants with these ingredients.

CAUTION!

Material damage due to excessive exposure times!
Exceeding the specified exposure time of the disinfectant may damage the

surfaces.
Observe the specified exposure time of the disinfectant manufacturer.

NOTE

Heavily diluted disinfectants may be used for disinfection.

6.3.2

Suitable disinfectants

Only surface disinfectants based on the following combinations of active ingredients may be used

for disinfection:
•  Aldehydes
•  Quaternary compounds
•  Guanidine derivatives

Ingredient group

Active ingredients

Aldehydes

2-ethyl-1-hexanal, formaldehyde, glutardialdehyde, glyoxal,

o-phthaldialdehyde, succinaldehyde

Quaternary compounds

Alkyl-didecyl-polyoxethyl ammonium propionate, alkyl-dimethyl-

alkylbenzyl ammonium chloride, alkyl-dimethyl-ethyl ammonium

chloride, alkyl-dimethyl-ethylbenzyl ammonium chloride,

benzalkonium propionate, benzalkonium chloride (alkyl-dimethyl-

benzyl ammonium chloride, coco-dimethyl-benzyl ammonium

chloride, lauryl-dimethylbenzyl ammonium chloride, myristyl-

dimethyl-benzyl ammonium chloride), benzethonium chloride,

benzyl-dihydroxyethyl-coco-alkyl ammonium chloride, dialkyl-

dimethyl ammonium chloride (didecyldimethyl ammonium chloride),

didecyl-methyl-oxyethyl ammonium propionate, mecetronium-ethyl

sulfate, methyl-benzethonium chloride, n-octyl-dimethyl-benzyl

ammonium chloride

Guanidine derivatives

Alkyl-biguanide, chlorhexidine-digluconate, cocospropylene-

diamine guanidinium diacetate, oliogomeric biguanide,

polyhexamethylene biguanide hydrochloride (oligo-diimino imiodo-

carbonyl imino-hexamethylene, polyhexanide)

Tab. 4:

Active ingredients of disinfectants

6.3.3

Disinfection procedure



Wipe or spray disinfect the product in accordance with the instructions of the disinfectant

manufacturer.

Содержание 5752 4916

































Результаты поиска

Содержание 5752 4916

Отзывы:

Бренды по названию

Популярные бренды

MEDAP 5752 4916, Руководство по эксплуатации

Результаты поиска

Содержание 5752 4916

Отзывы:

Бренды по названию

Популярные бренды