ActiveCare - Standard
User Manual
MAN-ActiveCare REV03
ActiveCare Standard USER MANUAL
Page 22 of 33
Pivot Bed Turn Left (factory installed to turn right)
Tools required
•
17mm wrench
•
17mm socket
•
Drill/Impact
1.
In the bed position, raise the height of the bed and head of the bed to its highest point.
2.
Locate and remove the two bolts pictured below that hold the actuator into place. Once
removed, install the actuator to the corresponding holes on the opposite side of the bed.
Bed and head section
raised all the way up
Remove bolts
using 17mm
wrench and socket
Corresponding
locations to install
actuator
