MED-EL Me151 Series, Руководство пользователя

Страница: 47 / 100

SONNET 2 audio processor
45
Flight mode
When boarding a flight or entering an environment where RF transmissions are prohib‑
ited, the 2.4 GHz wireless functionality must be deactivated, i.e. the audio processor's
flight mode must be activated, as wireless operations are typically not allowed on
airplanes or in certain restricted environments.
NOTE: The flight mode must be activated even if you do not intend to use the
MED‑EL FineTuner Echo, the MED‑EL AudioLink, or the MED‑EL AudioKey mobile app
at all.
To activate the flight mode, proceed as follows:
1. Switch off the audio processor (see chapter 4, SONNET 2 audio processor, Switching
the audio processor ON/OFF) and wait at least 2 seconds.
2. Switch on the audio processor and wait approx. 2 seconds or until the indicator
light blinks green for the first time.
3. Repeat steps 1 and 2.
4. Repeat steps 1 and 2 again.
5. Repeat steps 1 and 2 one more time.
6. After approx. 3.5 seconds the indicator light will briefly blink red to confirm that the
flight mode has successfully been activated. If you do not see the red light, repeat
steps 1 to 5.
Fig. 38 Activating the flight mode
When leaving the airplane or the restricted environment, you may deactivate the flight
mode.
To deactivate the flight mode, proceed as follows:
1. Switch off the audio processor and wait at least 2 seconds.
2. Switch on the audio processor. You can now use the audio processor and the
2.4 GHz wireless functionality as usual.
4×
2 s 2 s