MED-EL Me151 Series, Руководство пользователя, Страница: 19 / 100

SONNET 2 audio processor
17
Telecoil
The audio processor has an integrated telephone coil (telecoil). The telecoil picks up
magnetic sound signals coming from telephone receivers or loop systems which are
installed in some public buildings and converts them into audible signals.
To use the telecoil, proceed as follows:
• Activate the telecoil by pressing the key 🄳 (only signals picked up by the telecoil
will be audible) or 🄲 (signals picked up by the microphone and the telecoil will be
audible) on your FineTuner as described in chapter 4, SONNET 2 audio processor,
FineTuner, FineTuner controls.
• When you are using a telephone, position the telephone so that its earpiece is
centred over the control unit. Move the telephone slightly up or down as necessary
to optimise the signal quality.
• When you are in an environment with a loop system, try to find a spot where the
signal quality is best for you.
• To deactivate the telecoil when you do not need it anymore, press the key 🄴 on
your FineTuner as described in chapter 4, SONNET 2 audio processor, FineTuner,
FineTuner controls.
When you switch on the audio processor, the microphone is active even if you had
the telecoil selected before you switched off the audio processor. When the telecoil is
active, you may hear buzzing sounds when operating a FineTuner key. The buzzing is
normal and indicates that a command is being sent. To reduce interference with various
electronic and electrical equipment when the telecoil is active, we recommend you
reduce audio sensitivity (see chapter 4, SONNET 2 audio processor, FineTuner, FineTuner
controls).