MPCIB 396 P6
mect s.r.l.
ME3025_13 03/21
21
2.
threshold with programmed set point (SOGLIA)
3.
offset respect setpoint 1 (dELtA)
For both alarms it is possible to configure:
1.
starting relay condition (normally open or normally closed)
2.
eventual hysteresys
3.
eventual delay times (activation, deactivation or acti deactivation)
WINDOWED THRESHOLD (FinES). The output changes when the counting
crosses a window defined by two set point: SP1 and SP2 (SP2>SP1).
The output, inside of the window, can be normally activated or deactivated.
Besides for SP1 and SP2 it is possible to programme delay time or hysteresys (see
figure D). After reset the display shows the preset value.
Hy
Hy
Hy
Hy
Sp2
Sp1
figure D
THRESHOLD (SOGLIA). The output changes when the counting crosses the SP1
set point.
The output can be normally activated or deactivated.
Besides for SP1 it is possible to set up delay time or hysteresys (see figure E). After
reset the display shows the preset value.
Hy
Hy
Sp1
figure E
THRESHOLD WITH STOP COUNTING (S.StoP). When the counting reaches the
value written in the SP1 changes the output and stops itself. It is not possible to
programme delay time and hysteresys. After reset the display shows the preset value.