Mecmesin Orbis Скачать руководство пользователя страница 24

Страница: 24 / 27

page 21

MultiTest-

• Large easy-to-read touch screen display:

clearly shows test results and graphs

• Easy-to-use with minimal training:

“Simplicity itself” one button launches the test

• Instant access to 5 pre-stored tests:

instant selection of favourite tests

• Choice of 3 program modes:

Quick Test, Program Test and Advanced Test

• Colour-coded indication of “Pass” or “Fail” -

immediately alerts the operator

• Wide range of test stands:

capacities from 1kN to 50kN

MultiTest-

The MultiTest-

is a fully computer-controlled

tension and compression testing system.

Mecmesin’s Emperor™ software enables users to

develop sophisticated routines and analyses to meet

precise requirements for advanced testing

applications. 6 models are available with 1kN,

2.5kN, 5kN, 10kN, 25kN or 50kN capacity.

The MultiTest-

range of force testing systems

are ideal for quality control applications in
production environments.

Using touch screen technology the MultiTest-

is specifically designed for environments where
throughput, productivity and minimal training
are vital and where the use of a computer is not
always suitable.

Features Include:

Содержание Orbis




























Результаты поиска

Содержание Orbis

Отзывы:

Похожие инструкции для Orbis

Бренды по названию

Популярные бренды

Mecmesin Orbis, Руководство по эксплуатации

Результаты поиска

Содержание Orbis

Отзывы:

Похожие инструкции для Orbis

Бренды по названию

Популярные бренды