MechRC Shadow Stalker, Руководство пользователя

Страница: 21 / 27

5
Once Windows has
installed the drivers,
the USB adapter is
available for use.
Run "Setup.exe" in the "USB
to RS232" directory of the
CD-ROM. Note that you
will require Administrator
privileges in order to install
the software.
1
After the installation
has completed, click
the "Finish" button.
2
Connect the USB to RS232 adapter
into a free USB port.
3
4
installing the usb-serial adapter
To confirm the installation click the "Install" button.
The installation will proceed.
7
Click the "Finish" button to complete the
installation.
8
Windows will
automatically detect
the USB adapter and
install the required
drivers.
The robot can be connected directly to a free
9-pin RS232 serial port on your PC, however
many computers no longer have such ports and
will require the use of the supplied USB to RS232
adapter. To install the adapter, please follow the
instructions on this page.
Windows Vista Users
Windows Vista includes the
required drivers as standard
and will automatically install
the required drivers when the
adapter is plugged in.
Select the shortcut icons you wish to be
installed.
5 6
Additional components
that may be installed on
your computer
D u r i n g t h e i n s t a l l a t i o n
p r o c e s s t h e i n s t a l l e r
will install the following
prerequisite components on
your computer if they are not
already present:
- V i s u a l C + + 2 0 0 8
Redistributable
- DirectX 9.0
- Net Framework 2.0
I f t h e s e p a c k a g e s a r e
installed by the installer,
you will see a progress bar
a p p e a r o n yo u r s c r e e n .
These installations can be
cancelled, but this will also
terminate the installation of
MechRC Commander.
Windows Vista Users
Windows Vista users may
encounter the message "An
unidentified program wants
access to your computer"
during the installation.In this
case it is safe to click the
"Allow" button.