With the external control of the circuit protector, operator can detect a malfunction
such as overload or short circuit automatically. Besides, the reset can be performed
with external signal that is operator’s control system.
5
Precautions
5.1
Do not connect or disconnect the loads when the power is on.
5.2
Only reset after you have make sure there is no short circuit or overload. Must
make sure the causes that activate the protector circuit is clear before you reset
the reset button.
5.3 The protector circuit may fail to protect the MTAD3001 at some circumstances.
5.4 A frequent activation of the protector circuit in short interval time like 1 minute
may cause the protector circuit fail to protect the MTAD3001.
5.5 Do not block the ventilation holes created at the enclosures as they are designed
for dissipating the heat.
Mechano Transformer Corporation
For A Better Tomorrow
4F BUILDX No.3 , 2-7-12, Iwamoto-cho, Chiyoda-ku, Tokyo, 101-0032,
Japan.
Tel:03-5297-6088 FAX:03-5297-608
