DOC. MEUM-131205700. Version 01
Recommended separation distances between portable and mobile
RF communications equipment and the EQUIPMENT or SYSTEM –
for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
SUPPORTINGRecommended separation distances between portable and mobile RF
communications equipment and the model
PLA-600
The Model PLA-600 is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user ofthe Model PLA-600 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the Model PLA-600 as recommended below, according
tothe maximum output power of the communications equipment.
Rated
maximum
output of
transmitter
W
Separation distance according to frequency of transmitter
m
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above the recommended separation distance d
in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
byabsorption and reflection from structures, objects and people.