background image

NEED HELP? 1-800-832-2966

 

 

 

Site Preparation and Safety 

 

 

Thoroughly inspect the area where the tiller is to be used and remove all foreign objects. Your equipment can propel small 

objects at high-speed causing personal injury or property damage. Stay away from breakable objects, such as house 

windows, auto glass, greenhouses, etc. 

 

Keep area of operation clear of all bystanders, particularly small children and pets. 

 

After striking a foreign object, stop the engine. Remove the wire from the spark plug and keep the wire away from the plug 

to prevent accidental starting. Thoroughly inspect the tiller for any damage. If damaged, have the equipment repaired by a 

trained technician before restarting and operating. 

 

Only allow responsible individuals, who are familiar with the instructions, to operate the tiller. 

 

Never allow children or young teenagers to operate the tiller. 

 

Operational Precautions During Use 

 

 

Always wear ANSI compliant safety goggles or safety glasses with side shields when operating the tiller to protect your 

eyes from foreign objects, which can be thrown from the unit. 

 

Wear appropriate clothing such as a long-sleeved shirt or jacket. Also wear long trousers or slacks. DO NOT wear shorts. 

DO NOT wear loose clothing which could get caught in this equipment. 

 

Always wear work gloves and sturdy footwear such as leather work shoes or short boots. These will protect ankles and 

shins from small sticks, splinters, and other flying debris, and improve traction. 

 

Do not put hands or feet near or under rotating parts. 

 

Disengage clutch lever and stop engine before leaving the tiller in operating position. Wait until the tines come to a 

complete stop before removing debris or making any adjustments to the tiller. 

 

Do not attempt to till hard soil, till too deep or till at too fast a rate that can overload the tiller. 

 

If the tiller should start to vibrate abnormally, stop the engine, disconnect the spark plug wire and prevent it from touching 

the spark plug. Check immediately for the cause. Vibration is generally a warning of trouble 

 

Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or 

traffic. 

 

Exercise caution to avoid slipping or falling. Always be sure of your footing; keep a firm hold on the handle and walk; never 

run. Never operate the tiller at high speeds on slippery surfaces. 

 

Watch for holes, ruts, bumps, or other rough ground. Tall grass can hide obstacles. 

 

Never attempt to start the tiller unless the wheels are in a stable position.  Always start the tiller on a level surface. 

 

 

 

 

 

 

 

 

 

 

 

Содержание MM212FTT





























Отзывы: