NEED HELP? 1-800-832-2966
12
ASSEMBLY INSTRUCTIONS
Unboxing the Tiller
➢
The tiller comes with the majority of assembly completed.
➢
Remove all parts and packaging components.
➢
Use a utility knife to cut all four vertical edges and lay the box side panels flat around the tiller.
➢
Remove any remaining packaging.
➢
Assembly can be done sitting on the cardboard to protect the finish.
Wheel Assembly
1) Locate the wheel bracket and
wheels.
2) Place one 13mm washer on each
wheel axle.
3) Slide one wheel on each axle.
4) Place one 13mm washer on each
axle outside each wheel.
5) Secure the washers and wheels to
the wheel bracket using the
supplied circlips.
Attach Wheel Assembly to the Tiller
1) Ensure the tiller main body is on a stable surface.
2) Align wheel assembly with the frame brackets on the
rear of the tiller.
3) Attach the wheel assembly to the tiller main body pivot
holes using the 8mm shoulder bolts.
