Meccatronicore BB-Cure Midi, Руководство пользователя

Страница: 7 / 12

The program - Big is designed for the drying of large objects that
occupy a large part of the drying volume. The UV emission is
increased and the exposure time is 90 minutes. The temperature
curve will reach during the program
40 ° C, the program is started by pressing the display area
characterized visible symbol here side:
Program -
Big:
The program - Multi is designed for the drying of multiple
objects simultaneously, spaced apart and placed on the
supporting plane.
You can occupy the entire available space without overlapping
of objects; the issue should still be consistent and sufficient to
dry all the details introduced. The exposure time for this
program is 120 minutes. The temperature curve will reach
over 40 ° C program, the program is started by pushing the
display area characterized visible symbol here side:
Program -
Multi:
After selecting the program requires startup confirmation with
visible screen below:
Pushing GO! the program starts and the LEDs will light
Pushing BACK will return to the situation of stand-by without
activating the UV irradiation
(These options are available on all standard programs)
Once confirmed the start of one of the three programs will
see a progress screen similar to that seen on the right.
It will indicate: - the selected program
- The total program time
- The temperature of the drying volume
- the status of progress of the program.
In the lower area of the display are two selectable fields
that allow you to take action on the current program by
putting it in pause or interrupting.
The right screen will appear after you press the button:
(pause) the LEDs will turn off and the oven will wait for
further commands (in this situation you can open the door)
Warning: Read the safety notes!
The side screen shot will appear instead of pressing the
button: (stop) the LEDs will turn off, and then a
confirmation screen. (See figure here on the right).
you can then confirm the abandonment of the program by
selecting YES or return to the current program by pressing
No
.