Meccatronicore BB-Cure Midi, Руководство пользователя

Страница: 6 / 12

Programs
The BB-Cure system has a touchscreen interface
microprocessor controlled and a simple and intuitive
software that allow you to control every aspect of the
drying of your objects in resin process.
Our UV oven has four drying programs: three for
standard use to finalize small products, large, multi
object and a fourth program intended for the castable
resins specifically designed for the jewelery field (in
Jewerly version) and for the dental field (in dental
version of the oven).
All four programs use the controlled emission of many UV
LEDs 405nm very powerful and expediting the effect of heat
due to the temperature control system.
The multiple action of several UV emitters allows the
radiating-ing at 360 ° without having to rotate the piece.
schermate d’accensione
The standard programs:
From the start-up screen
automatically switches to the
stand-by screen visible in the
two images on the right,
respectively, illustrated in the
two versions Jewerly and Dental
of BB-Cure oven.
In this condition the oven is
powered and ready to
accept the user-selected
program.
Schermata stand-by
del modello Jewerly
Schermata stand-b
del modello Dental
The program - Little is designed for the drying of small objects
that occupy a reduced space of the drying volume. The UV
emission is reduced and the exposure time is 60 minutes. The
temperature curve will reach over 40 ° C program, the program is
started by pressing the display area characterized visible symbol
here side:
Program - Little: