25 - FRONTAL ROTATING MOWER SET
CONNECTION TO THE MOTOCULTIVATOR
The rotating mower set is attached to the motor cultivator by means of the Quick Fit connection.
26 - CUTTING HEIGHT ADJUSTMENT
Cutting height is easily adjusted by tightening or
loosening the lever “
15
”.
27 - BLADE ASSEMBLY AND DISASSEMBLY
The blade can be easily removed by unscrewing the
two screws “16”;, to reassemble it, clean the cutter
hub “17” thoroughly and tighten the screws as far as
they are fully secured and cutting blades turn freely.
N.B.: Always change self blocking nuts with new
ones.
Check the mower set oil level every 200 hours
through the screw “18”. Add oil, if necessary.
Use oil SIGMA SAE 30.
AFTER 500 h. change whole oil.
15
15
18
IMPORTANT !
17
16
- 12 -
