12 - CONTROLS
1
6
7
3
5
IMPORTANT !
1.
Engine stop lever
2.
Clutch control lever
3.
Handlebar vertical lock lever
4.
Steering column horizontal lock lever
5.
Forward and reverse gear control lever
6.
Throttle control lever
7.
P.T.O. control lever
8.
Gear control lever
9.
Wheels disengagement lever
4
1
1
2
9
3
7
8
8
5
MOTOCULTIVATOR
MOTOMOWER
13 – ENGAGING GEARS
The motocultivator has 4 speed gearbox (2 f 2 RV) selected
by levers 5 and 8.
•
With handlebars in tilling position (white symbols on the plate)
:travel direction is selected with lever and the 1
st
and 2
nd
speed are
selected with lever 8.
•
With handlebars in front implements position (black symbols on
the plate): travel direction is selected with lever 5, and the 1
st
and
2
nd
speed are selected with lever 8.
ATTENTION
– To avoid unnecessary strain on the controls, make
sure that the P.T.O. is in idle position before engaging the reverse
gear (and vice versa).
N.B.: Use the clutch to make speed engagement easier. In order to
make the engagement of the direction selector easier, set the engine at
minimum running and operate the lever without using the clutch..
Avoid a protracted clutch disengagement in order to limit the wear of
the thrust bearing.
14 – ENGINE START-UP
3
2
- 7 -
When starting the engine, follow the
instructions contained in the engine’s “Use
and Maintenance” booklet, and after having
made sure that the gear control and P.T.O.
control levers are in idle position, lock the
motor stop lever 1 and clutch lever 2 by
using hook 3.
