Mec NANO HIPPO 50WH, Руководство пользователя, Страница: 23 / 27

21
This chapter summarizes the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the information
below, contact the Consumer Care Center in your country.
Problem Possible solution
You ignored the filter replacement
alerts. You did not replace the filter
when the filter replacement light
started flashing and did not respond
when the appliance started to beep
every 30 minutes after approx. 3
weeks. As a result, the appliance is
now locked and you have to replace
the filter and reset the appliance (see
chapter “Filter replacement”) so that
the appliance can operate again.
TROUBLE SHOOTING
The appliance doesn’t work
No air comes out the air outlet
The appliance is not switched on. Put
the plug into the wall socket and
switch on the appliance.
The fan speed does not
change when the AUTO mode
is activated
When the room becomes dark, the
night mode is activated automatically
when the appliance is in the auto
mode. In this case, the fan speed is
set to a very low level. If you wan to
change the fan speed, press the
HIGH-SOEED, MID-SPEED and
LOW-SPEED buttons to set the
desired fan speed.