Mec NANO HIPPO 50WH, Руководство пользователя, Страница: 22 / 27

20
1
2
Picture 21
Reset the appliance
After the filter replacement, put the plug into power socket and there will be
the on music. The appliance reaches standby status.
Press the button “ ” on the controller for 2 seconds or the reset
button at the air quality sensor inlet for 2 seconds to make the reset. When the
buzzer sounds one time, the using time of the filter has been cleared and
restarted. The light of the air quality is on indicating that the reset is successful.
POWER
AIR-QUALITY SILENT
LOW-SPEED MID-SPEED HIGH-SPEED
PLASMA
AUTO
RESET
Note: The reset button at the air quality sensor inlet can clear the
filter using time and restart time counting at any time. If no encounter
with special circumstances, please do not press the reset button when
the filterreplacement light is not flashing.
Note: Only replace a filter when the corresponding filter
replacement light flashes. If you replace the filter before the filter
replacement light starts flashing, the lifetime counter will not be reset but
will continue counting the lifetime of the previous filters. As a result, the
filter replacement light will start flashing much too soon.
AIR INLET