manualshive.com logo in svg

Mec 5492RT, Руководство оператора

Поделиться
Скачать
Mec 5492RT Скачать руководство пользователя страница 7

Page 3

92RT Scssor Lfts - Operator’s Manual

July 2020

Secton 2 - Safety

Safety Alert Symbols & Fall Protection

MEC manuals and decals use symbols, colors and signal words to help you recognize important 
safety, operation and maintenance information.

RED and the word DANGER – Indicates an imminently hazardous 
situation which, if not avoided, will result in death or serious injury�����

ORANGE and the word WARNING – Indicates a potentially hazardous 
situation which, if not avoided, could result in death or serious injury�����

YELLOW with alert symbol and the word CAUTION – Indicates a 
potentially hazardous situation which, if not avoided, may result in minor 
or moderate injury�����

YELLOW without alert symbol and the word CAUTION – Indicates a 
potentially hazardous situation which, if not avoided, may result in 
property damage�����

GREEN and the word NOTICE – Indicates operation or maintenance 
information�����

Fall Protection

Operators must comply with employer, job site and governmental rules regarding the use of personal 
protective equipment.

If required by your employer or job site

, use personal fall protection equipment (PFPE) when 

operating this machine.

All PFPE must comply with applicable governmental regulations, and must be inspected and used in 
accordance with the PFPE manufacturer’s instructions.

Fall restraint must be properly attached to a designated anchorage point when driving or operating 
the machine. Attach only one fall restraint to each anchorage point.

ART_4713

ART_3020

Содержание 5492RT

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды