Mec 45-J Diesel, Руководство по обслуживанию и запасным частям

Страница: 71 / 260

Page 65 45-J Desel - Servce & Parts Manual
January 2022
Mechanical Components
This section describes the major components of the machine and the steps required to service them.
Base
When steam cleaning or pressure washing the base/undercarriage, cover
electrical components to prevent water penetration������
Steam clean the base as necessary, and inspect all welds and brackets. Check for cylinder pins that
have turned in their mounting, which may indicate sheared retaining pins.
Tires & Wheels
Inspect for cuts, chunking, side-wall damage, or abnormal wear. Any tire faults MUST BE
CORRECTED before further machine operation. Refer to Parts sections for replacement tires.
FAILURE TO USE APPROVED PARTS MAY CAUSE DEATH OR SERIOUS
PERSONAL INJURY������
REPLACE TIRES WITH THE CORRECT TIRES TO MAINTAIN THE RATING
OF THE EQUIPMENT������
ON MACHINES WHERE FOAM FILLED TIRES ARE FITTED AS ORIGINAL
EQUIPMENT, TIRES MUST BE REPLACED WITH EQUIVALENT
SPECIFICATION TIRES AND FOAM-FILL WEIGHT������ CONTACT MEC
SERVICE������
Changing Tires
Refer to “Lift and Support The Machine” in Section 9 for instructions and safety precautions.
Always chock the tires before lifting the machine������
Chock tires on the end of machine opposite the tire to be changed.
Break loose but
do not remove lug nuts before raising the machine.
Lift the end of machine requiring a tire change and support with jackstands of adequate capacity.
Remove lug nuts and pull the wheel off.
Install the replacement wheel.
Install lug nuts and tighten.
Lower the machine.
Tighten lug nuts to proper torque (Refer to Specifications).
Remove the chocks.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Mechanical Components
Secton 18 - Mechancal Components