Mec 1930SE, Руководство по обслуживанию и запасным частям

Страница: 43 / 195

“SE Series ” Service and Parts Manual March 201 7
Page 2-4
F
A U L T
C
O D E S
FAULT
D
ESCRIPTION MODELS
32 Angle Sensor
Fault
42
Platform Left Turn Switch
ON at power-up Message
43
46
P latform Joystick Enable
Switch ON at power-up
Fault
47
52 Drive forward coil fault
All Models
1. (Check the angle sensor and wiring,
the normal range of voltage output
is 1.9 - 3.8V
2. (Check the option code)
All Models
All Models
SOLUTIONS
All Models
1. ( Wait several seconds when turn on
the lift)
2. (Check the joystick deadman switch) )
All Models
1. (Check the joystick)
2. (Check the platform controller)
1. (Check the left steer button)
2. (Check the platform controller)
Platform Right Turn Switch
ON at power-up Message
1. (Check the right steer button)
2. (Check the platform controller)
P latform Joystick not in
neutral at power-up
Message
Not Used
All Models
(Check the forward solenoid and wiring)
(Check the option code)
53 Drive reverse coil fault
Not Used
All Models
(Check the backward solenoid and wiring)
(Check the option code)
54 Lift Up Coil Fault
All Models
( Check the lift solenoid and wiring )
55 Lift Down Coil Fault All Models
( Check the down solenoid and wiring )
56 Right Turn C oil Fault All Models
( Check t he right steering
solenoi d a nd wiring)
57 Left Turn C oil Fault All Models ( Chec k the left steering solenoid and wiring)
58 All Models General Brake Coil Fault
1. (C heck the brake module and wiring)
2. (Check brakes and wiring)
3. (Check the battery voltage)
5 9 Not Used Parallel Coil Fault
to the Coil's terminals and make sure they
are tight. If so, check the coil itself to see
(Parallel Coil Fault: Check the connections
if it is open or shorted.)
60
Motor Controller Fault
All Models
( Replace the ZAPI controller)
(Only for ZAPI large electric)