Meazura MEZ1000, Руководство пользователя

Страница: 30 / 110

Entering data using Graffiti®2 handwriting software (Entering Data in Your Meazura™ MEZ1000 RDA)
Write numbers here
Write lowercase
letters here
Write uppercase letters
across these division marks
To write Graffiti 2 letters:
1. Tap the screen where you want to write text, for example, on a line next to a time in the Date
Book.
NOTE
A blinking cursor must appear onscreen above the Graffiti 2 writing area before you can begin
writing text.
Blinking cursor
2. Use the tables on the following pages to find the stroke shape for the letter you want to write.
For example, the stroke shown below creates the letter
n .
Lift stylus here
Start stroke
at heavy dot
You use the same shape to create the lowercase letter and the uppercase letter.
3. Position the stylus in the appropriate place of the text input area.
4. Start your stroke at the heavy dot, and draw the stroke shape as it appears in the tables.
5. Lift the stylus from the screen at the end of the stroke shape.
6. Your RDA recognizes your stroke immediately and displays the letter at the insertion point
onscreen. As soon as you lift the stylus from the screen, you can begin the stroke for the next
character you want to write.
Graffiti®2 tips
When using Graffiti 2 writing, keep the following tips in mind:
·
For greater accuracy, draw letters with large strokes; strokes that nearly fill the text input area are
easily interpreted.
·
To delete characters, set the insertion point to the right of the character you want to delete, and
draw the Backspace stroke (a line from right to left) in the text input area.