manualshive.com logo in svg

Meazura MEZ1000, Руководство пользователя

Поделиться
Скачать
Meazura MEZ1000 Скачать руководство пользователя страница 107

107

Part X

Maintaining Your RDA

It is important to maintain your RDA.

The Meazura™ MEZ1000 RDA is dustproof and waterproof to IP67 standards, but it must be kept as
clean as possible. This will help avoid possible accidents occuring or damage being done to the
Meazura™ MEZ1000, especially when connecting or operating the RDA near other electrical
equipment.

Always keep the RDA free from hazardous substances, dirt, debris, and submergence in liquid.

A list of recommended practises for maintaining the RDA are covered in this chapter along with thoses
that should be avoided.

Environmental Factors

Storage Conditions

Store the RDA in a cool dry place.

Operating Conditions

While operating the RDA please ensure it is free of moisture, particularly when operating around
electrical equipment. The Meazura™ MEZ1000 is waterproof and dustproof to IP67 standards and can
be operated in most environmental conditions. We do not however, recommend the RDA be operated
in extreme conditions (e.g. Underwater for long periods, in extreme hot and cold environments, or at
extreme altitude).

Avoiding Hazardous Substances

The plastic case of the Meazura™ MEZ1000 is made of a Bayer Bayblend FR2000. At room
temperature, the RDA is resistant to mineral acids, a large number of organic acids and aqueous
saline solutions. The Meazura™ MEZ1000 is not resistant to bases, aromatics, ketones, esters,
chlorinated hydrocarbons and  some greases and oils.

Bayblend FR 2000 is noted for the properties, of toughness, stiffness, heat resistance and is flame
retardant.

Cleaning your RDA

When removing mud and other debris from the Meazura™ MEZ1000, use a damp cloth and a soft

bristle brush and completely dry the Meazura™ MEZ1000 before using.

WARNING

For safety reasons, ensure the RDA is completely dry before charging and operating near electrical
equipment.

Содержание MEZ1000















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды