miniLAB 1008 User's Guide
Calibrating and Testing the Device
o
The
Pass
status light illuminates green to indicate a successful test, and the
next row is automatically highlighted for the next signal test.
o
If the
Fail
status LED turns red, the test on the connection failed, and the
following dialog displays.
Click on the
OK
button, check your connections, and repeat the test. If you verify
the connection and the test still fails, contact MCC Technical Support.
3.
Repeat the test in each row until all of the signals have been tested. The wire
illustration dynamically updates the numbers of the pins that you connect in each
row. The dialog below shows the
External
DIO
Test
dialog after you pass all of the
digital signal tests.
4.
When you are done testing the digital channels, click on the
OK
button to return to
Insta
Cal’s main form.
5-5