miniLAB 1008 User's Guide
Functional
Details
Table 4-4. Sample channel gain queue list
Element
Channel
Range
0
CH0
BIP10V
1
CH0
BIP5V
2
CH7
BIP10V
3
CH2
BIP1V
When a scan begins with the gain queue enabled, the miniLAB 1008 reads the first
element, sets the appropriate channel number and range, and then acquires a sample. The
properties of the next element are then retrieved, and another sample is acquired. This
sequence continues until all elements in the gain queue have been selected. When the
end of the channel list is detected, the sequence returns to the first element in the list.
This sequence repeats until the specified number of samples is gathered. You must
carefully match the gain to the expected voltage range on the associated channel
—
otherwise, an over range condition can occur. Although this condition does not damage
the miniLAB 1008, it does produce a useless full-scale reading. It can also introduce a
long recovery time from saturation, which can affect the next measurement in the queue.
Digital connector cabling
Table 4-5 lists the digital I/O connector, applicable cables and accessory equipment. The
x
in the compatible cable name indicates the length of the cable.
Table 4-5. Digital connector and accessory equipment
Connector type
37 D-Type, shielded
C37FF-
x
(Figure 4-13)
C37FFS-
x
(Figure 4-14)
Compatible cables
C37FM-
x
(Figure 4-15)
Compatible accessory products
CIO-MINI37
SSR-RACK24
SSR-RACK08
CIO-ERB24
CIO-ERB08
4-16